Removing The Stirrer Cover And Stirrer Fan Assemblies - Jenn-Air JMD2124WS Technical Education

REMOVING THE STIRRER COVER AND STIRRER FAN
1. Remove the Drawer Assembly,
see Removing the Drawer Assembly
page 4-8.
2. Remove the two canoe clips that secure
the front of the stirrer cover. These clips
are removed by gently prying them from
their mounting holes, see figure1.
3. Disengage the Stirrer Cover Assembly
notches from the tabs in the microwave
top at the rear, see figure 1.
The cover will drop and the Stirrer Fan
will be accessible, see figure2.
Canoe Clips
Stirrer Cover Assembly
Figure 1
ASSEMBLIES
Notches
Stirrer Cover Assembly
4. Remove the Stirrer Fan Assembly.
5. Reassemble in reverse order making
sure to not damage the Canoe Clips as
it is necessary to reuse these clips to
resecure the Stirrer Cover Assembly.
4-9
Stirrer Fan Assembly
Figure 2