Removing The Stirrer Motor - Jenn-Air JMD2124WS Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug microwave drawer or disconnect
power.
2. Remove the microwave drawer from the
cabinet. (see page 4-2 for the
procedure).
3. Remove the top panel. (see page 4-2
figure 2.)
Stirrer Motor
Figure 1
4. Remove two screws securing the stirrer
motor, see figure 1.

REMOVING THE STIRRER MOTOR

Screws
5. Disengage two tabs on the bracket from
the mounting holes in the motor,
see figure 2.
6. Remove two connectors and replace
motor, see figure 2.
Stirrer Motor
Bracket
Tabs
7. Be sure to reattach the stirrer fan assembly
to the motor. This may require performing
the procedures outlined in steps 1-5 on
page 4-9 Removing the Stirrer Cover and
Stirrer Fan Assemblies.
4-10
Connectors
Figure 2.