Jenn-Air JMD2124WS Technical Education page 25

ACCESSING INTERNAL COMPONENTS (continued)
7. Remove exhaust duct and back cover
(see figures 5 & 6).
Exhaust Duct
Cover Screws
Figure 5
Back Cover
Screws
Figure 6
7. To remove the Control Panel Assembly,
remove the top panel as outlined in step
5 in this section.
8. Remove (2) screws on each end on the
back of the control panel, see figure 7.
9. Unsnap the top control panel assembly
from the frame and drop down to the front
of the microwave, see figure 8.
10. Unplug all wires. The frame and Power
Control Board can now be serviced,
see figure 8.
Control Panel
Frame
Control Panel
4-3
Two Screws
Figure 7
Power Control
Board
Figure 8