Dual Stage Shock Sensor - Eaglemaster E8 User Manual

- Dual stage shock sensor:

This device only activates after 5 seconds of arming state; this is preventing from the
weak impact caused by the driver while leaving the car.
-Light impact will activate the 1st stage sensor by giving 3 short warning chirps. 2-way
remote will respond 5 beeps and flashing icon as under.
2-way LCD display :
-Heavy impact will activate the 2nd stage sensor and trigger the alarm for 20sec. 2-way
remote will respond melody and flashing icon as under.
2-way LCD display :
NOTE: Adjustments are made via the rotary control above the shock sensor.
- Remote Zone1 sensor bypass:
This system offer 2 stage sensors bypass feature . Within 5sec. after set arming, to press
button once , the system will give 2 short chirps , the 1st stage bypassed. Press button
Once again, within 5sec. the system will give 3 short chirps, the 2nd stage bypassed.
2-way LCD display :
Note: - if remote sensor bypassed, it will be detected again by next arming.
- if armed with silent mode, to operate sensor bypass will only indicate by lights flash.
Zone 1 - 1st stage
sensor trigger
With 5 beeps sound
Zone 1 - 2nd stage
e sensor trigger
With Melody sound
Press the button
Zone1- 1st stage
sensor bypass.
With 2 beeps sound
Zone 2 -1st stage
sensor trigger
With 5 beeps sound
Zone 2 -2nd stage
sensor trigger
With Melody sound
within 5sec. of amring.
Zone1- 2nd stage
sensor bypass.
With 3 beeps sound