Standard Features; To Arm The System; Arm Without Siren Chirp - Eaglemaster E8 User Manual

Two way remote engine start car alarm

Hide thumbs

Table Of Contents

Table of Contents

- To ARM the system:

To arm your system within proper operation range, simply press button

system in disarmed or Acc off position) . The system will respond one siren chirp, one lights

flash, doors lock, disable engine starter,

second, indicating that the system is actively protecting your vehicle.

2-way LCD display :

- Arm without siren chirp :

You may temporarily to arm your system without siren chirp , to operate it by simply press and hold

the button

for over 2sec. until the remote give 1 beep sound, then release the button

The system will armed and without one siren chirp.

Note: this features is only activated under the system is in disarmed and Acc off position,.

- Defective Zone Bypass & Alert:

If the security system is armed at the same time that an input is active (such as a door opening

or hood / trunk opening ), you will hear one siren chirp to indicate arming and after 5 seconds

a second siren chirp to indicate bypass Notification. A Bypass Notification chirp means that the

security system ignores the input that was active when the system was armed, until that input

ceases.

Note: You may press 2-way remote button

Defective zone

Door opened

Trunk opened

Hood opened