Lexus CT200h Operating Manual page 61

Hide thumbs Also See for CT200h:
Table of Contents

Advertisement

Laws and regulations pertaining to anchors
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifications can be
used.
This vehicle is designed to conform to the SAE J1819.
WARNING
When installing a booster seat
To prevent the belt from going into ALR lock mode, do not fully extend the shoulder
belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to
the child. (P. 33)
When installing a child restraint system
Follow the directions given in the child restraint system installation manual and fix the
child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other passengers
may be seriously injured or even killed in the event of sudden braking, sudden swerving
or an accident.
If the driver' s seat interferes with the child
restraint system and prevents it from being
attached correctly, attach the child restraint
system to the right-hand rear seat.
Adjust the front passenger seat so that it does
not interfere with the child restraint system.
Only put a forward-facing child restraint sys-
tem on the front seat when unavoidable.
When installing a forward-facing child
restraint system on the front passenger seat,
move the seat as far back as possible even if
the "AIR BAG OFF" indicator light is illumi-
nated. Failure to do so may result in death or
serious injury if the airbags deploy (inflate).
When a booster seat is installed, always ensure that the shoulder belt is positioned
across the center of the child' s shoulder. The belt should be kept away from the child' s
neck, but not so that it could fall off the child' s shoulder. Failing to do so may result in
death or serious injury in the event of sudden braking, sudden swerving or an acci-
dent.
Ensure that the belt and plate are securely locked and the seat belt is not twisted.
Shake the child restraint system left and right, and forward and backward to ensure
that it has been securely installed.
After securing a child restraint system, never adjust the seat.
Follow all installation instructions provided by the child restraint system manufacturer.
CT200h_OM_OM76174U_(U)
1-1. For safe use
I n f o r ma t i o n P r o v i d e d b y :
61
1

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ct 200 hybrid

Table of Contents