Lexus CT200h Operating Manual page 125

Recall procedure
■
Carry the electronic key that has been registered to the driving position, and
then unlock and open the driver' s door using the smart access system with
push-button start or wireless remote control.
The driving position will move to the recorded position.
If the driving position is in a position that has already been recorded, the seat and out-
side rear view mirrors will not move.
Cancelation procedure
■
Carry only the key you want to cancel and then close the driver' s door.
If 2 or more keys are in the vehicle, the driving position cannot be canceled
properly.
Turn the power switch to ON mode.
1
While pressing the "SET" button, press and hold the door lock switch
2
(either lock or unlock) until the buzzer sounds twice.
If the button could not be canceled, the buzzer sounds continuously for approxi-
mately 3 seconds.
Recalling the driving position using the memory recall function
■
Different driving positions can be registered for each electronic key. Therefore, the
●
driving position that is recalled may be different depending on the key being carried.
If a door other than the driver' s door is unlocked with the smart access system with
●
push-button start, the driving position cannot be recalled. In this case, press the driving
position button which has been set.
WARNING
Seat adjustment caution
■
Take care during seat adjustment so that the seat does not strike the rear passenger or
squeeze your body against the steering wheel.
CT200h_OM_OM76174U_(U)
3-3. Adjusting the seats
I n f o r ma t i o n P r o v i d e d b y :
125
3