Lexus CT200h Operating Manual page 574

574
9-1. Specifications
Hybrid battery (traction battery)
Type
Voltage
Capacity
Quantity
Overall voltage
Lubrication system
Oil capacity
(Drain and refill — reference
With filter
Without filter
*
: The engine oil capacity is a reference quantity to be used when changing the engine
oil. Warm up the engine and turn off the hybrid system, wait more than 5 minutes, and
check the oil level on the dipstick.
Engine oil selection
■
"Toyota Genuine Motor Oil" is used in your Lexus vehicle. Use Lexus
approved "Toyota Genuine Motor Oil" or equivalent to satisfy the following
grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good start-
ing in cold weather.
If SAE 0W-20 is not available, SAE
5W-20 oil may be used. However, it
must be replaced with SAE 0W-20
at the next oil change.
CT200h_OM_OM76174U_(U)
Nickel-Metal hydride battery
7.2 V/module
6.5 Ah (3HR)
28 modules
201.6 V
*
)
4.4 qt. (4.2 L, 3.7 Imp.qt.)
4.1 qt. (3. 9 L, 3.4 Imp.qt.)
Outside temperature
I n f o r ma t i o n P r o v i d e d b y :