Lexus CT200h Operating Manual page 512

512
7-3. Do-it-yourself maintenance
Replace the light bulb, and install
4
the bulb base.
Align the 3 tabs on the light bulb with
the mounting, and insert.
Turn and secure the bulb base.
5
Shake the bulb base gently to check
that it is not loose, turn the headlight
high beams on once and visually
confirm that no light is leaking
through the mounting.
When installing the cover, conduct step
6
Halogen fog light (if equipped)
■
Remove 2 screws, a bolt and clip,
1
and pull down the fender liner.
Pull the fender liner down slowly,
being careful not to dislodge any
fixed components.
CT200h_OM_OM76174U_(U)
in reverse.
1
I n f o r ma t i o n P r o v i d e d b y :