Lexus CT200h Operating Manual page 524

524
8-2. Steps to take in an emergency
Emergency towing procedure
Take out the towing eyelet. (P. 548)
1
Remove the eyelet cover using a flat-
2
head screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the hole
3
and tighten partially by hand.
Tighten down the towing eyelet
4
securely using a wheel nut wrench
or hard metal bar.
Securely attach a cable or chain to the towing eyelet.
5
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the hybrid system.
6
If the hybrid system does not start, turn the power switch to ON mode.
Shift the shift position to N and release the parking brake.
7
CT200h_OM_OM76174U_(U)
I n f o r ma t i o n P r o v i d e d b y :