Lexus CT200h Operating Manual page 170

170
4-3. Operating the lights and wipers
Type B

The daytime running lights
1
turn on.
The side marker, parking,
2
tail, license plate, daytime
running lights and instru-
ment panel lights turn on.
The headlights and all the
3
lights listed above (except
daytime running lights) turn
on.
The headlights, side marker,
4
parking lights, daytime run-
ning lights and so on turn on
and off automatically (when
the power switch is in ON
mode).
Turning on the high beam headlights
With the headlights on, push the
1
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and release
2
it to flash the high beams once.
You can flash the high beams with the
headlights on or off.
Daytime running light system
■
To make your vehicle more visible to other drivers, the parking lights turn on automati-
cally (at an increased intensity) whenever the hybrid system is started and the parking
brake is released. Daytime running lights are not designed for use at night.
For the U.S.A.: Daytime running lights can be turned off by operating the headlight
switch to DRL OFF position.
CT200h_OM_OM76174U_(U)
I n f o r ma t i o n P r o v i d e d b y :