Lexus CT200h Operating Manual page 165

About engine braking
■
When shift position B is selected, releasing the accelerator pedal will apply engine brak-
ing.
• When the vehicle is driven at high speeds, compared to ordinary gasoline-fueled vehi-
cles, the engine braking deceleration is felt less than that of other vehicles.
• The vehicle can be accelerated even when shift position B is selected.
If the vehicle is driven continuously in the B position, fuel efficiency will become low. Usu-
ally, select the D position.
When driving with cruise control or dynamic radar cruise control activated
■
Even if switching the driving mode to sport mode with the intent of enabling engine brak-
ing, engine braking will not activate because cruise control or dynamic radar cruise con-
trol will not be canceled.
Automatically P position selection function
■
When the shift position is in a position other than P, pressing the power switch with the
vehicle stopped completely will cause the shift position to change to P automatically, and
then the power switch will turn off.
If the shift position cannot be shifted from P
■
There is a possibility that the 12-volt battery is discharged. Check the 12-volt battery in
this situation. (P. 561)
After recharging/reconnecting the 12-volt battery
■
P. 486
Customization
■
Settings (e.g. Reverse warning buzzer) can be changed.
(Customizable features: P. 591)
WARNING
When driving on slippery road surfaces
■
Do not accelerate or shift the shift position suddenly.
Sudden changes in engine braking may cause the vehicle to spin or skid, resulting in an
accident.
For the shift lever
■
Do not remove the shift lever knob or use anything but a genuine Lexus shift lever
knob. Also, do not hang anything on the shift lever.
Doing so could prevent the shift lever from returning to position, causing unexpected
accidents to occur when the vehicle is in motion.
P position switch
■
Do not press the P position switch while the vehicle is moving.
If the P position switch is pressed when driving at very low speeds (for example, directly
before stopping the vehicle), the vehicle may stop suddenly when the shift position
switches to P, which could lead to an accident.
CT200h_OM_OM76174U_(U)
4-2. Driving procedures
I n f o r ma t i o n P r o v i d e d b y :
165
4