Lexus CT200h Operating Manual page 506

506
7-3. Do-it-yourself maintenance
After a fuse is replaced
■
If the lights do not turn on even after the fuse has been replaced, a bulb may need
●
replacement. (P. 507)
If the replaced fuse blows again, have the vehicle inspected by your Lexus dealer.
●
If there is an overload in a circuit
■
The fuses are designed to blow, protecting the wiring harness from damage.
When replacing light bulbs
■
Lexus recommends that you use genuine Lexus products designed for this vehicle.
Because certain bulbs are connected to circuits designed to prevent overload, nongenu-
ine parts or parts not designed for this vehicle may be unusable.
WARNING
To prevent system breakdowns and vehicle fire
■
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or injury.
Never use a fuse of a higher amperage rating than that indicated, or use any other
●
object in place of a fuse.
Always use a genuine Lexus fuse or equivalent.
●
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
●
Fuse box near the power control unit
■
Never check or replace the fuses as there are high voltage parts and wiring near the
fuse box.
Doing so may cause electric shock, resulting in death or serious injury.
NOTICE
Before replacing fuses
■
Have the cause of electrical overload determined and repaired by your Lexus dealer as
soon as possible.
CT200h_OM_OM76174U_(U)
I n f o r ma t i o n P r o v i d e d b y :