178
4-3. Operating the lights and wipers
The sensor sensitivity can be adjusted when "AUTO" is selected.
Increases the sensitivity
5
Decreases the sensitivity
6
Washer/wiper dual operation
7
The wipers will automatically operate
a couple of times after the washer
squirts.
Vehicles with headlight cleaners: If
the headlights are on, the headlight
cleaners will operate once.
The windshield wipers and washer can be operated when
■
The power switch is in ON mode.
Raindrop sensor (vehicles with rain-sensing windshield wipers)
■
The raindrop sensor judges the amount of
●
raindrops.
An optical sensor is adopted. It may not oper-
ate properly when sunlight from the rising or
setting of the sun intermittently strikes the
windshield, or if bugs etc. are present on the
windshield.
If the wiper switch is turned to the "AUTO" position while the power switch is in ON
●
mode, the wipers will operate once to show that AUTO mode is activated.
If the temperature of the raindrop sensor is 194F (90C) or higher, or 5F (-15C) or
●
lower, automatic operation may not occur. In this case, operate the wipers in any mode
other than "AUTO".
If no windshield washer fluid sprays
■
Check that the washer nozzles are not blocked if there is washer fluid in the washer fluid
tank.
CT200h_OM_OM76174U_(U)
I n f o r ma t i o n P r o v i d e d b y :