Unpacking Instructions; Tools Needed For Assembly - Emerson CF244BS00 Owner's Manual

44” & 52” damp & wet location ceiling fan

Hide thumbs Also See for CF244BS00:

Owner's manual (21 pages)

Owner's manual (24 pages)

Table Of Contents

Table of Contents

BP7408-1 44" &

52" Curva

THE FAN MODELS CF244BS, CF244CRM, CF252BS & CF252CRM ARE SUITABLE

FOR DAMP LOCATIONS SUCH AS COVERED PORCHES, COVERED PATIOS,

AND COVERED DECKS...ANYWHERE THERE IS A ROOF OVERHEAD.

THE FAN MODELS CF244WW, CF244ORB, CF252WW & CF252ORB ARE

SUITABLE FOR WET LOCATIONS SUCH AS PORCHES, PATIOS, AND DECKS.

This Manual is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One Phillips head screwdriver

One wire stripper

One stepladder

Materials

Wiring, outlet box and box connectors

must be of type required by the local code.

The minimum wire would be a 3-conductor

(2-wire with ground) of the following sizes:

For your convenience, check-off boxes are provided next to each step. As each

step is completed, place a check mark in the box. This will insure that all steps

have been completed and will be helpful in finding your place should you be

interrupted.

WARNING

Do not install or use fan if any part is

damaged or missing. Call Toll-Free:

1-800-654-3545

WARNING

This product is designed to use only

those parts supplied with this product

and/or

any

accessories

specifically for use with this product by

Emerson Electric Co. Substitution of

parts or accessories not designated for

use with this product by Emerson Electric

Co. could result in personal injury or

property damage.

8/31/10

3:50 PM

Page 3

Installed Wire Length

Up to 50 ft.

50-100 ft.

Before assembling your ceiling fan, refer

to section on proper method of wiring

your fan (Page 9). If you feel you do not

have

experience, have your fan installed by a

licensed electrician.