Warnings; Site Preparation; Ap-8132 Package Contents - Motorola AP-8132 Installation Manual

6

1.2 Warnings

• Read all installation instructions and site survey reports, and verify correct equipment installation before
connecting the AP-8132 model Access Point.
• Remove jewelry and watches before installing this equipment.
• Verify any device connected to this unit is properly wired and grounded.
• Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment
operation specifications.

1.3 Site Preparation

• Consult your site survey and network analysis reports to determine specific equipment placement, power
drops, and so on.
• Assign installation responsibility to the appropriate personnel.
• Identify and document where all installed components are located.
• Ensure adequate, dust-free ventilation to all installed equipment.
• Identify and prepare Ethernet and console port connections.
• Verify cable lengths are within the maximum allowable distances for optimal signal transmission.

1.4 AP-8132 Package Contents

An AP-8132 Access Point is available in external antenna models only. An AP-8132 ships with the following:
• AP-8132 access point
• AP-8132 Installation Guide (This Guide)
• Wall mount screw and anchor kit
• Accessories bag (LED light pipe for above the ceiling installations)
NOTE
An AP-8132 Access Point can ship with a separately ordered protective
cover (facade) containing a 6-element MIMO antenna (Part No.
ML-2452-PTA6M6-1). When attached, LEDs continue to illuminate
through the cover (similar to the illustration on the next page). A version
of the facade is also available without the MIMO antenna. This cover
(Part No. 21-8132FAC-01) functions strictly as a protective cover for the
Access Point and provides no operational functionality.
AP-8132 Access Point