6
1.2 Warnings
• Read all installation instructions and site survey reports, and verify correct equipment installation before
connecting the Access Point.
• Remove jewelry and watches before installing this equipment.
• Verify the unit is grounded before connecting it to the power source.
• Verify any device connected to this unit is properly wired and grounded.
• Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment
operation specifications.
1.3 Site Preparation
• Consult your site survey and network analysis reports to determine specific equipment placement, power
drops, and so on.
• Assign installation responsibility to the appropriate personnel.
• Identify and document where all installed components are located.
• Ensure adequate, dust-free ventilation to all installed equipment.
• Identify and prepare Ethernet and console port connections.
• Verify cable lengths are within the maximum allowable distances for optimal signal transmission.
1.4 AP-6562 Package Contents
An AP-6562 access point is available in internal antenna and external antenna models. Contents differ depending
on the model ordered.
1.4.1 Internal Antenna Model Package Contents
Part Number
AP-6562-66030-US
AP-6562-66030-WR
AP-6562-66030-EU
AP-6562 internal antenna models (AP-6562-66030-US, AP-6562-66030-WW and AP-6562-66030-EU) include the
following:
•
Access Point with internal antennas
•
Weatherproof RJ45 plug kit
•
AP-6562 Installation Guide (This Guide)
Description
AP-6562: Outdoor Dual Radio 802.11N US
AP-6562 Outdoor Dual Radio 802.11N INTL
AP-6562 Outdoor Dual Radio 802.11N EU
AP-6562 Access Point