Motorola AP-8132 Installation Manual page 10

10
is connected. The Access Point continues to operate with power supplied from the AC adapter without change to
the Access Point operating configuration. If using AC adapter supplied power and a change to the AP's operating
configuration is warranted, the Access Point needs to be manually rebooted by the customer.
CAUTION
A separate Power Injector is required for each AP-8132 Access Point comprising the network.
The Power Injector can be installed free standing, on an even horizontal surface or wall mounted using the power
injector's wall mounting key holes. The following guidelines should be adhered to before cabling the Power Injector
to an Ethernet source and an Access Point:
• Do not block or cover airflow to the Power Injector.
• Keep the Power Injector away from excessive heat, humidity, vibration and dust.
The Access Point supports any standards-based compliant power
source (including non-Motorola Solutions power sources). However,
using the wrong solution (including a POE system used on a legacy
Motorola Solutions Access Point) could either limit functionality or
severely damage the Access Point and void the product warranty.
AP-8132 Access Point