Automatic Answering Exchange Call; Outgoing Exchange Call; Decadic To Tone Signalling; Hold - Telstra Commander E105 Installation And Maintenance Manual

Automatic Answering
Exchange Call

* Outgoing Exchange Call

Decadic to Tone
Signalling

Hold

Music-On-Hold

Hold Automatic Ring Back

If an incoming call is not seized when the handset is lifted, check:
.
as for 'Incoming Exchange Call'
.
keypad features programming
If the correct number is not reached, check:
.
Test the exchange line
If the tone signalling is not heard after pressing [MODE], replace the
keystation.
If an exchange call does not hold, check:
.
keystation ribbon lead connection.
Determine the music source.
.
Check 53 for Line 1 and 54 for Line 2 on the HRDB-E.
Position 1 & 2 - Internal music.
Position 2 & 3 - External music.
For external music source, check:
.
Music source and its connection to the PTU
repair lies with the customer.
.
OFB-E is correctly installed and jumper (53) is set correctly.
If ring back does not occur after 90 seconds, replace the keystation.
If the system is connected to a PABX, and the correct number is not
obtained, check:
keystation' Auto-Pause Insert' program.