Table of Contents
Advertisement
Test Failure
Test Mode Exit
Programming
Defective Equipment
If a keystation does not function correctly during any of the LED,
Keyboard or Audio tests, the line cord and internal ribbon cable should
be checked. If the keystation is still faulty, it should be replaced.
When the test is complete:
.
Go off-hook.
All LEDs will illuminate for one second, then turn off.
Refer to Chapter Five -System Programming.
When equipment is defective, you must complete a Customer
Equipment Return Analysis Form (Form BS3 1) Available as S3 1 S/3 1.
Advertisement
Chapters
Table of Contents
