Table of Contents
Advertisement
Telephone Operation
Adjusting the Ringer volume
There is a ringer volume switch located on the right side of the
Phone Book
telephone base. The switch has three positions, which correspond
In use
Ring
Delete
to low, medium and high volumes. Position the switch at the
OK/Dial
Melody
M-D
required volume.
M3
M4
M5
M6
Receiving a call, using the handset
The callers number will appear on the display while the telephone
is ringing. If you have programmed the callers number into
memory and assigned a name to that number, your Telstra A248
will display the name of the caller instead.
NOTE: if the caller is stored in your Phone Book as RINGER OFF, your
Telstra A248 will give a single ring tone to alert you to the incoming
call.
1) Lift the Handset, the call is answered, the In Use LED will
illuminate.
After 5 seconds the call timer will appear on the display
Making a call, using the handset
To call a number in your Phone Book
1. Press the Phone Book key.
2. Using the [up icon] [down icon] keys select the number or press a
key on the keypad to search alphabetically, select the number you
wish to dial.
3. lift the handset, the number will be dialled.
To call a number using the keypad or M1 to M6 memory keys
1. Lift the handset
2. Listen for a dial tone.
KEYPAD
3. Enter the number you wish to dial using the keypad or press the
desired M1 to M6 key, the number will be dialled.
M1
(M1 to M6
buttons)
After 5 seconds the call timer will appear on the display
6
Receiving a call, using Hands Free
Hands Free
1. Press the Hands Free key, the [speaker icon] will appear on the
display and the In Use LED will illuminate.
After 5 seconds the call timer will appear on the display
Making a call, using Hands Free
Hands Free
1. Press the Hands Free key, the In use LED will illuminate.
2. Listen for dial tone, then enter the number you wish to call.
To switch between handset and Hands Free
1.To switch from Hands Free to handset operation, simply lift the
handset.
Hands Free
2.To switch from handset to Hands Free operation, press the
Hands Free key and replace the handset.
Caller List
The Callers list records the number, date and time of the last 12
calls. The LCD display will show the following information:
[New Call Icon] with a count of new calls
R
[Repeat Call Icon] with a count of repeat calls
To view the Caller List
1. Press the caller list ([up icon])
2. Use the [up icon] [down icon] to scroll through the entries
You may dial any of these numbers by pressing the OK/Dial key
OK/Dial
Delete
You may delete these numbers by pressing the Delete key
M-D
You may store the number into your Phone Book using the Store
Store
key
7
Advertisement
Table of Contents
