Incoming Calls - Telstra Commander E105 Installation And Maintenance Manual

Incoming Calls

Audible Signalling
Do Not Disturb
Exchange Call Automatic
Answer
Exchange Call Queuing
Flexible Ring Assignment
During a Call
Call Transfer
Conference
Hold - Common
Hold - Recall
Distinctive ring tones from the keystation loudspeaker signal incoming
exchange line, intercom and hold recall calls.
NOTE: The exchange line ring cadence is internally generated within
the system anddoes not track the exchange ring cadence.
When invoked, this facility blocks the audible signals of all incoming
exchange line and intercom calls. Each keystation provides visual
indication of DND.
Each keystation can be programmed to automatically answer incoming
exchange line calls when the handset is lifted.
When Exchange Call Automatic Answer is selected, and more than 1
call is ringing, lifting the handset will answer the oldest call.
Each keystation can be programmed to signal or not signal
exchange line calls by an audible tone on a per-line basis.
Allows an exchange line call to be transferred to another keystation after
it has been announced.
Allows the establishment of a conference with one external and two
internal parties or three internal parties.
Places a call on hold for any keystation to retrieve.
When an exchange line call is placed on hold, a reminder ring signal is
activated every 90 seconds at the keystation that initiated the hold
condition.
incoming