Telstra Commander E105 Installation And Maintenance Manual page 122

Call Back
Refer to Centel User Guide for a complete description of this feature.
To Set Call Back:
Lift the handset
l
Press a free [LINE]
l
The selected [LINE] lamp glows steadily at all stations.
Hear the dial tone
l
Dial the required number or press the appropriate speed dial key [l-8]
l
If you hear busy tone press [CALL BACK]
l
The dial sequence *37# is automatically sent to line.
Replace the handset.
l
To Cancel Call Back:
Lift the handset
l
Press a free [LINE]
l
The selected [LINE] lamp glows steadily at all stations.
Press [CALL BACK]
l
The dial sequence #37# is automatically sent to line.
Replace the handset.
l
The E105/208+ will not ring with the distinctive Centel call back cadence. Call
back calls are presented as normal calls.
Page 6- 2
Call Diversion
Refer to Centel User Guide for a complete description of this feature.
Call Diversion - Immediate
To Store Call Diversion - Immediate:
Press [CALL DIVERT]
l
Press [l]
l
Lift and replace the handset.
l
The divert immediate code is now stored under the [CALL DIVERT] key.
To Set Call Diversion - Immediate:
Lift the handset
l
Press a free [LINE]
l
The selected [LINE] lamp glows steadily at all stations.
Press [CALL DIVERT]
l
Dial number to which calls are to be diverted or press speed dial key
l
The dial sequence *21 is sent to line automatically before the telephone
number:
Press [CALL DIVERT]
l
The dial sequence # is sent to line.
Replace the handset.
l