Headset Mode - Telstra Commander E105 Installation And Maintenance Manual

Headset Mode

Headset Mode programming is a keystation user level option, and is
included here for completeness only.
A keystation handset may be replaced by a suitable Austel permitted
headset. When connected and activated, the [SPKR] key is used to
perform the off-hook function. Headset Mode is protected against
accidental activation and de-activation by a two-key activation
sequence.
To activate Headset Mode:
.
Press and Hold [HSET/MODE]
.
Press and Release [SPKR].
To deactivate Headset Mode:
With the handset on-hook,
.
Press and Hold [HSET/MODE]
.
Press and Release [SPKR].
Once activated, Headset Mode is selected as follows:
To select Headset Mode:
.
Press [HSETLMODE]
.
The [HSETLMODE] key will glow.
To de-select Headset Mode:
.
Press [HSET/MODE]
.
The [HSETLMODE] key will go out.
NOTE 1: When Headset Mode is selected, the handset function is
controlled by pressing the [SPKR] key.
NOTE 2: When in Headset Mode, the station cannot be operated in
off-hook mode.