Telstra Commander E105 Installation And Maintenance Manual page 117

Holding Calls
To Place an Outside Call on Hold:
Ask the outside party to wait
l
Press [HOLD]
l
The [LINE] lamp flashes slowly at all stations.
The outside party hears music.
The handset can be replaced.
l
To Retrieve a Held Call from Any Station:
Lift the handset
l
Press the appropriate slowly flashing [LINE].
l
If a call on hold is not retrieved within 90 seconds, the hold recall signal rings.
This signal will repeat at 90 second intervals until the call is retrieved.
To Make an Inquiry Call while a Call is on Hold:
Ask the outside party to wait
l
Press [HOLD]
l
The [LINE] lamp flashes slowly at all stations.
The outside party hears music.
Press required DSS key [ l-81 or make an outside call on the other line if
l
equipped
Make your inquiry
l
Press the appropriate slowly flashing [LINE] to return to the held call.
l
(If
programmed.)
Transferring Calls
Any outside call can be transferred to another station.
To Transfer a Call:
Ask the outside party to wait
Press [HOLD]
The [LINE] lamp flashes slowly at all stations.
The outside pat-8 is placed on hold and hears music.
Ensure that the intercom lamp is extinguished
Press the required DSS key [l-8]
The intercom lamp glows steadily at all other stations.
Announce the transfer
Replace the handset.
The call is answered at the called station bp pressing the appropriate
slowly flashing [LINE].
User Gwde