Wall Mounting Keystations - Telstra Commander E105 Installation And Maintenance Manual

Wall Mounting Keystations

To mount a keystation on the wall:
Obtain a Wall Mounting Kit (WMK-E)
Push out the handset rest from the centre of the wall mounting
bracket and insert it in the hole under the earpiece in the handset
Refer to Illustration 13 - Installing The Handset Rest.
Remove and discard the modular socket cover and locate the
modular socket inside the wall bracket
Remove the centre cut-out of the wall mounting bracket
Attach the wall mounting bracket to the wall using four screws.
Do not overtighten the screws.
Refer to Illustration 14 - Keystation Wall Mounting
Dimensions.
Connect the short line cord between the socket and the top of the
key station
Clip the keystation into the wall mounting bracket.
Refer to Illustration 15 - Wall Mounting the Keystation.
Installing The Handset Rest