Anonymous Call Rejection; Push To Talk - Telstra VVX 500 Features Manual

Telstra IP Telephony - Media Phone VVX 500 Feature Guide
57. Cancel Call Waiting
 Lift
the telephone handset, enter the
code *70
assigned
The Call Waiting service is turned off so that
you can make an uninterrupted phone call.
The Call Waiting service will be back on
after the next outgoing phone call
58. Last Number Redial

Lift the telephone handset, enter the
assigned code *66
 The last outgoing phone number is
redialled
59. Call Return
 Lift the telephone handset, enter the
assigned code *69

The last incoming phone number is
redialled
60. Calling Line ID Delivery Blocking
 Lift the telephone handset, enter the
assigned code *67

Dial the intended phone number
 The call is placed, and your calling line ID is
not displayed
61. Calling Line ID Delivery Per-call

Lift the telephone handset, enter the
assigned code *65
 Dial the intended phone number

The call is placed, and your calling line ID is
not displayed for this call
Telstra IP Telephony Media Phone VVX500 Feature Guide May 2012

62. Anonymous Call Rejection

To activate Anonymous Call Rejection per
call

Lift the telephone handset, enter the
assigned code *77
To deactivate Anonymous Call Rejection per call

Lift the telephone handset, enter the
assigned code *87
63. Push-to-Talk

Lift the telephone handset, enter the
assigned code *50
 Dial the intended phone number

The Push-to-Talk call is connected
Note: This feature can be used between 2
users. This feature needs to be configured by
the Customer Group Administrator in
CommPilot.
64. Clear Voice Message Waiting Indicator
 Lift the telephone handset

Enter the assigned code *99
 The visual message waiting indicator light
on your phone has been cleared
65. Speed Dial 100

Lift the telephone handset, enter the
assigned code *75
 Enter a two digit number representing the
speed dial number to be assigned

Enter the phone number to assign to the
speed dial, press Send
(You will receive a confirmation message
that your speed dial was successfully
assigned)
To dial the Speed Dial number
 Enter * then two digits assigned, press the
Dial soft key
66. Speed Dial 8
 Lift the telephone handset, enter the
assigned code *74

Enter a number from 2-9 representing the
speed dial number to be assigned
 Enter the phone number to assign to the
speed dial and press the Send soft key
(You will receive a confirmation message
that your speed dial was successfully
assigned)

To dial the Speed Dial number, enter the
speed dial number assigned (2-9), press the
dial soft key
Note: Handset functions provide telephony
services via your telephone handset. Your Group
Administrator assigns these functions to you and
your work group. You may need to check with
them that these have been assigned to you.
11