Troubleshooting - SMA SUNNY BEAM User Manual

SMA Solar Technology AG
11 Troubleshooting
Problem
System search
The Sunny Beam does
not list the NetID of your
Bluetooth PV system.
User Manual
Cause and solution
• There is no device from your Bluetooth PV system within the radio
range of your Sunny Beam.
– Place the Sunny Beam closer to a device in your Bluetooth PV
system. If this is not possible, use the SMA Bluetooth repeater to
bridge the radio gap.
• The devices in your Bluetooth PV system are not in operation.
– Determine a free NetID, as described in the section "Determining
a free NetID" (page 21), and then commission the devices as
described in the respective manual.
• The NetID 0 (Bluetooth off) or NetID 1 were possibly set on the
devices. The Sunny Beam cannot detect devices with NetID 1.
– Set the free NetIDs in your Bluetooth PV system to the inverters
and any available SMA Bluetooth repeaters, as described in the
respective manual. If no NetID has been determined for the
Bluetooth PV system, determine a free NetID as described in the
section "Determining a free NetID" (page 21).

Troubleshooting

BeamBT-BEN091910 77