Changing The Live Query Duration - SMA SUNNY BEAM User Manual

Operation
6.9.2 Changing the live query duration
The live query only begins if you call up the chart "Power today" for the complete PV system or for one
of the inverters.
In a live query, the Sunny Beam reads the current values for power and total energy yield ("Power"
and "E-Total" in the Sunny Beam power and energy display) in that precise moment. This way, you
can see the current power live and, for example, observe the effect of a passing cloud on your PV
system.
The values for "E-Today" are not updated during the live query. These data are updated by Sunny
Beam once per hour according to the default setting (Chapter 6.9.1 "Changing the data query
frequency" (page 49)).
You can change the duration of the live query. The default setting is 20 seconds.
1. Select "Settings > Data query > Live query:".
2. Set the interval.
☑ The duration of the live query has been changed.
Power consumption
The longer the duration of the Sunny Beam live query, the more power the Sunny Beam will
consume.
50 BeamBT-BEN091910
SMA Solar Technology AG
User Manual