Sunny Beam Alarms - SMA SUNNY BEAM User Manual

With bluetooth wireless technology
Hide thumbs Also See for SUNNY BEAM:
Table of Contents

Advertisement

SMA Solar Technology AG
6.7 Sunny Beam alarms
The Sunny Beam has a buzzer which emits an alarm when a "Fault" event occurs or when the battery
state is too low.
Alarm
1 long signal
(lasts for 3 seconds)
1 short signal
(lasts for 0.5 seconds)
3 short signals in
immediate sequence
User Manual
Repetition
Adjustable, see
Chapter 6.7.1 
Once every ten minutes
until the display
switches off after the set
duration (Chapter
6.8.2 "Changing the
display switch-off"
(page 47)).
Meaning
The event "Fault" has occurred.
(Chapter 6.6 )
The state of charge of the battery is too low.
Charge the batteries as described in Chapter
6.5.2 
The state of charge of the batteries is so low that
reliable operation is impossible. The Sunny Beam
is switched off.
Charge the batteries as described in Chapter
6.5.2 
BeamBT-BEN091910
Operation
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents