Change Device Name - SMA SUNNY BEAM User Manual

SMA Solar Technology AG
6.11.4 Change device name
The device names of the detected inverters are displayed as serial numbers in the Sunny Beam. You
can change the serial numbers to a descriptive device name, in order to be able to better distinguish
between the inverters in the Sunny Beam. The names you give the devices are only shown on the
Sunny Beam and will not be transferred to the inverters or displayed on any other communication
device (e.g. Sunny Explorer).
1. Select "Settings > PV plant > Change device name".
☑ The list of devices that the Sunny Beam manages is
displayed.
2. Select the serial number or a previously assigned device
name.
☑ The input page appears.
Arrow: deletes the character which was entered last.
Cross: cancels the input action.
Check mark: the entered device name is saved.
3. Delete the serial number or previously assigned device
name using the arrow.
4. Enter a new device name using the characters.
Umlauts in device names are not displayed correctly in the CSV files.
User Manual BeamBT-BEN091910
Operation
61