Data Query; Changing The Data Query Frequency - SMA SUNNY BEAM User Manual

SMA Solar Technology AG
6.9 Data query
6.9.1 Changing the data query frequency
You may change the frequency at which the Sunny Beam is to query data from the inverters. The
default setting is 1 hour.
1. Select "Settings > Data query > Data query every:".
2. Set frequency.
☑ The frequency for data queries has been changed.
Power consumption
The higher the data query frequency is, the more energy the Sunny Beam will consume.
One query per day is in principle sufficient, since the data is buffered in the inverter.
Preset Overnight Shutdown
As the default setting, the Sunny Beam data query from inverters is shut down over night,
because the solar inverters do not supply at night and therefore do not generate any data.
If you are using a wind inverter from SMA Solar Technology, you need to disable the
Overnight Shutdown (Chapter 6.9.3 "Disabling the Overnight Shutdown" (page 51)).
User Manual BeamBT-BEN091910
Operation
49