Switching On The Display/Calling Up The Main Menu - SMA SUNNY BEAM User Manual

SMA Solar Technology AG Operation
6.1.1 Switching on the display/calling up the main menu

Switching on the display/calling up the main menu

You can switch on the display by pressing or turning the button. The Sunny Beam opens the first chart,
"Power today", in the chart view for the complete system. The chart view is described in Chapter
6.3 "Chart view" (page 33).
You can switch from the chart view to the main menu by pressing the button. After 3 minutes, the Sunny
Beam will always switch from the menu to the chart "Power today" for the complete system
automatically, unless the display switches off automatically first.
The display switches off automatically
The Sunny Beam will automatically switch off the display after being idle for 1 minute, to save energy.
You can change this duration as described in Chapter 6.8.2 "Changing the display switch-off"
(page 47).
User Manual BeamBT-BEN091910 31