Display Settings; Changing The Contrast; Changing The Display Switch-Off - SMA SUNNY BEAM User Manual

SMA Solar Technology AG
6.8 Display settings
6.8.1 Changing the contrast
1. Select "Settings > Display options > Contrast".
2. Select "Upper contrast" or "Lower contrast".
3. Set the contrast.
☑ The contrast is changed.
6.8.2 Changing the display switch-off
The Sunny Beam will automatically switch off its display after being idle for 1 minute to save energy.
You may adjust the duration or set the display to always remain switched on (Setting "-").
1. Select "Settings > Display options > Display off after:".
2. Set the interval.
☑ The switch-off has been set up.
Power consumption
The longer the display remains switched on, the higher the power consumption of the
Sunny Beam.
User Manual BeamBT-BEN091910
Operation
47