SMA SUNNY BEAM User Manual page 24

Commissioning
26. Note down the NetIDs already in use, or cross them out in the following illustration.
27. Repeat the system search with the Sunny Beam on each device in the PV system and at the
desired installation site of the Sunny Beam itself. Note down the NetIDs already in use, or cross
them out in the following illustration.
Sunny Beam cannot detect any devices with the NetID set to 1. Therefore, NetID 1 has already
been crossed out in this illustration.
28. Once the system search has been carried out on all the devices, choose a NetID for your PV
system which was not displayed by the Sunny Beam.
☑ The free NetID is determined.
29. Set the free NetID on the inverters and available SMA Bluetooth repeaters, as described in the
respective manual.
30. Commission the inverters and available SMA Bluetooth repeaters as described in the respective
manual.
24 BeamBT-BEN091910
SMA Solar Technology AG
User Manual