SMA SUNNY BEAM User Manual page 26

Commissioning
Setting the NetID for your own Bluetooth PV system
33. Move the selection frame to the NetID of your own
Bluetooth PV system by turning the button.
34. Press the button.
☑ The Sunny Beam establishes a connection to your
Bluetooth PV system.
☑ The Sunny Beam then lists the serial numbers of the
detected inverters.
– If not all inverters of your Bluetooth PV systems are
listed, or if inverters from other system are listed, please
refer to Chapter 11 "Troubleshooting" (page 77).
Selecting the required inverters (only applies when more than 12 inverters are
available)
The Sunny Beam can only manage a maximum of 12 inverters. If your Bluetooth PV system comprises
more than 12 inverters, you must select the 12 inverters that you want the Sunny Beam to manage.
35. Press the button to select the inverters that are to be managed by the Sunny Beam.
selected
not selected
26 BeamBT-BEN091910
SMA Solar Technology AG
User Manual