Fault And Warning Symbol - SMA SUNNY BEAM User Manual

Operation
6.5.3 Fault and warning symbol
The Sunny Beam indicates faults or warnings relating to the
devices by displaying the fault or warning symbol in the chart
view.
You will find details on the fault or warning in the menu "Events"
(see Chapter 6.6 "Calling up events" (page 43)). As soon as you
call up the menu "Events", the symbol will no longer be shown on
the display.
If there are no unread warnings or faults, no symbol is displayed.
Symbol
Warning
Fault
42 BeamBT-BEN091910
Meaning
A fault may occur in the foreseeable future. The warning symbol is, for
example, displayed if there is a frequent grid overvoltage.The warning
symbol is, for example, displayed if there is a frequent grid overvoltage.
• The symbol appears in the display for the complete PV system and
the inverters.
• The warning is entered in the list under "Events".
A fault has occurred. The fault symbol is displayed if an inverter requires
external help (from an installer) in order to function properly.
• The symbol appears in the display for the complete PV system and
the inverters.
• The fault is entered in the list under "Events".
• An alarm sounds until the user turns or presses the button
(6.7.1 "Set/disable alarm for faults" (page 46)).
SMA Solar Technology AG
User Manual