SMA SUNNY BEAM User Manual page 23

SMA Solar Technology AG
For the inverters and the SMA Bluetooth repeaters, the NetID is set using rotary switches. During
commissioning, the Sunny Beam will display the NetIDs of all PV systems with SMA Bluetooth which
are within its radio range. You may then choose one of the displayed NetIDs for your own PV system.
Leave the preset NetID 1 for the devices. Start by determining a free NetID, as follows.
24. Place the Sunny Beam near a device in your Bluetooth PV system.
25. To start the system search, the button "Start detection"
must be dark. Press this button.
☑ The system search will begin.
☑ The Sunny Beam detects all Bluetooth PV systems
within range and lists the NetIDs of the detected
Bluetooth PV systems. In the list, the NetIDs are sorted
according to connection quality; the NetID with the
best connection quality is placed at the top. The listed
NetIDs are already in use on Bluetooth PV systems in
the vicinity. You may not use these NetIDs.
– If the Sunny Beam does not list any NetIDs, there are no Bluetooth PV systems within the
radio range of the Sunny Beam. All NetIDs are free.
User Manual
Commissioning
BeamBT-BEN091910 23