Set/Disable Alarm For Faults - SMA SUNNY BEAM User Manual

Operation
6.7.1 Set/disable alarm for faults
If the event "Error" occurs, a 3 second long alarm will sound. The
alarm is repeated after a certain interval set by the user until you
press the button, however, not for more than 24 hours.
1. Select "Settings > Alerts".
2. Select "Signal every:".
3. Set the interval.
The default setting is 30 minutes. To disable the alarm,
select "- - -".
☑ The alarm for faults has been set.
46 BeamBT-BEN091910
SMA Solar Technology AG
User Manual