Adjusting The Energy Meter When Switching Devices; Setting The Maximum Plant Power In Kwp - SMA SUNNY BEAM User Manual

Operation
5. To save the device name, select the check mark.
☑ The device name has been changed.
6.11.5 Adjusting the energy meter when switching devices
1. Select "Settings > PV plant > Offset energy meter".
2. Select the new inverter.
3. Set the revenue of the previous inverter.
☑ The energy meter has been adjusted.
6.11.6 Setting the maximum plant power in kWp
The plant power in kWp (kilowatt peak) is the maximum possible performance of the PV system and
serves to compare PV systems of different sizes with one another. You can find out the value in kWp
from your installer.
The Sunny Beam requires the plant power in kWp to calculate the
specific annual yield (kWh/kWp). The specific annual yield is
one of the charts displayed by the Sunny Beam, depicted to the
right.
The Sunny Beam can display the plant performance for the last
20 years. The more years are included, the more narrow the
columns will be.
62 BeamBT-BEN091910
SMA Solar Technology AG
User Manual