Changing The Date And Time; Activating/Deactivating Daylight Saving Time - SMA SUNNY BEAM User Manual

SMA Solar Technology AG
6.13 Changing the date and time
Inverters with SMA Bluetooth piggy-back
If you use inverters with SMA Bluetooth piggy-backs, you must set the correct values for
date, daylight saving time, time and time zone. If you reset the time after commissioning,
the data associated with the time difference will be deleted from the inverter. Please note
that the time may also be reset if you change the settings for time zone or daylight saving
time.
1. Select "Settings > Date & time".
2. Select "Date:" or "Time:" and change the setting.
☑ The date and time are changed.
6.14 Activating/deactivating daylight saving time
Inverters with integrated SMA Bluetooth piggy-back
If you use inverters with SMA Bluetooth piggy-backs, you must set the correct values for
date, daylight saving time, time and time zone. If you reset the time after commissioning,
the data associated with the time difference will be deleted from the inverter. Please note
that the time may also be reset if you change the settings for time zone or daylight saving
time.
1. Select "Settings > Date & time".
2. Set or remove a checkmark in the box for "Daylight saving time". When there is a checkmark in
the box, daylight saving time is activated. The time settings on the Sunny Beam and on the
inverters will switch to daylight saving time.
☑ Daylight saving time is activated / deactivated.
User Manual BeamBT-BEN091910
Operation
67