3. Install the Woodruff key into the drive
shaft.
4. Align the groove in the impeller 5 with
the Woodruff key 6, and then install the
impeller onto the drive shaft.
5. Install the washers 7, wave washer 8,
spacer 9, and collar 0 onto the drive
shaft.
63P3F11
Drive shaft and lower case (regular rotation model)
NOTE:
• The collar and spacer should fit together
firmly.
• While pulling the drive shaft up, install the
collar with an appropriate tool a that fits
over the drive shaft as shown.
6. Install the new O-ring A and insert car-
tridge B into the pump housing C.
C
c
NOTE:
Align the insert cartridge projections b with
the holes c in the pump housing.
A
A A
b
c
B
b
S63P6360
6-22
1
2
3
4
5
6
7
8
9