Removing Coffee And Powder Dispenser Motors - VKI Technologies Eccellenza touch Service Manual

Service Manual

Removing Coffee and Powder Dispenser Motors

1.
2.
3.
To install a dispenser motor, follow these same instructions in the reverse order.
38
The coffee and the powder dispenser motors are the same component, with
the motor coupling configured differently. The coupling can be easily pushed
out of the motor housing with a 9/32 nut driver.
Coffee Motor Configuration
Disconnect the inline wiring connector for the motor to be removed (circled in yellow).
Remove the two screws securing the motor to be removed to the machine (red
arrows).
NOTE: When re-installing these screws, the torque must be 4 in/lbs for the coffee
motors, and 7 in/lbs for the powder motors.
Remove the motor(s).
When removing or installing a coffee motor, the wiring (and the connector)
needs to be passed through the round opening in the coffee dispenser base.
Powder Motor Configuration (default)
VKI Publication #100309-001