Set Up And Operation; One Pixel Bar (Built-In Programs, Static Color); One Pixel Bar (Auto Run Visual Effects); One Pixel Bar (Sound-Control) - SHOWTEC Pixel bar 12 User Manual

Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Control Modes
There are 6 modes:
One Pixel Bar (Built-in Programs, Static
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. When the Pixel Bar is not connected by a DMX-cable, it functions as a stand-alone device.
Please see page 13 or 15 for more information about the built-in programs.
One Pixel Bar (Auto run visual
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. When the Pixel Bar is not connected by a DMX-cable, it functions as a stand-alone device.
Please see page 13 for more information about the Auto run visual effects.

One Pixel Bar (Sound-control)

1.Plug the end of the electric mains power cord into a proper electric power supply socket.
2. Turn on the music. If the device is set to SOUN, then the Pixel Bar will react to the beat of the
music. Please see page 14 for more information about the sound-control
Multiple Pixel Bars
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Use a 3-p XLR cable to connect the Pixel Bar.
The pins:
3. Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out"
socket to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on page 12+13 (Built-in Programs,
Auto Run or Music control). This means on the master device you can set your desired
operation Mode and all slave devices will react the same as the master device.
• Built-in programs (page 13)
• Auto run (visual effects) (page 13)
• DMX512 (page 14)
• Master/Slave (page 14)
• Sound-controlled (page 14)
• Static Color (page 15)
effects)
(Master/Slave control)
1. Earth
2. Signal -
3. Signal +
Multiple Pixel Bars
Color)
(Master/Slave control)
8
options.
Max. 30 Pixel Bars
Fig. 3