Pnp/Pci Configurations - Advantech ARK-3202 User Manual

Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary IDE 0 (1)
or Secondary IDE 0 (1) becomes active. The choices are "Enabled" and "Dis-
abled".
FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if the FDD, inter-
face, COM port, or LPT port is active. The choices are "Enabled" and "Dis-
abled".
PCI PIRQ [A-D]#
When Enabled, the system resumes from suspend mode if an interrupt occurs.
The choices are "Enabled" and "Disabled".
PWRON After PWR-Fail [ON/Off/Former-Sts]
Use this to set up the system after power failure. The "Off" setting keeps the sys-
tem powered off after power failure, the "On" setting boots up the system after
failure, and the "Former-Sts" returns the system to the status before power fail-
ure.
3.2.10

PnP/PCI Configurations

Reset Configuration Data [Disabled]
The default is Disabled. Select Enabled to reset Extended System Configuration
Data (ESCD) if you have installed a new add-on card, and system configuration
is in such a state that the OS cannot boot.
Resources Controlled By [Auto(ESCD)]
The commands here are "Auto(ESCD)" or "Manual". Choosing "Manual"
requires you to choose resources from the following sub-menu. "Auto(ESCD)"
automatically configures all of the boot and Plug and Play devices, but you must
be using Windows 95 or above.
ARK-3202 User Manual 44