Advantech ARK-3202 User Manual page 48

Onboard Serial port 1 [3F8 / IRQ4]
This item allows user to adjust serial port 1 of address and IRQ.
Onboard Serial port 2 [2F8/ IRQ3]
This item allows user to adjust serial port 2 of address and IRQ.
UART Mode select [Normal]
This item allows you to select UART mode.
Onboard Parallel Port [378/IRQ7]
This item allows user to adjust parallel port of address and IRQ.
Parallel Port Mode [ECP+EPP]
This item allows user to adjust parallel port mode.
ECP Mode Use DMA [3]
This item allows user to adjust ECP DMA resource.
CIR Port Address [Disable]
This item allows user to adjust CIR port of address and IRQ.
Onboard Serial port 3 [CA0/IRQ10]
This item allows user to adjust serial port 3 of address and IRQ.
Onboard Serial port 4 [CA8/IRQ10]
This item allows user to adjust serial port 4 of address and IRQ.
Onboard Serial port 5 [CB8/IRQ10]
This item allows user to adjust serial port 5 of address and IRQ.
Onboard Serial port 6 [CB8/IRQ10]
This item allows user to adjust serial port 6 of address and IRQ.
Onboard Serial port 7 [C80/IRQ11]
This item allows user to adjust serial port 7 of address and IRQ.
This serial port 7 need to be provided by LPC module (optional)
COM7 Auto Direction [Disable]
This item allows user to enable Auto-Flow control function of COM7 if sup-
ported.
Onboard Serial port 8 [C88/IRQ11]
This item allows user to adjust serial port 8 of address and IRQ.
This serial port 8 need to be provided by LPC module (optional)
COM8 Auto Direction [Disable]
This item allows user to enable Auto-Flow control function of COM8 if sup-
ported.
Onboard Serial port 9 [C90/IRQ11]
This item allows user to adjust serial port 9 of address and IRQ.
This serial port 9 need to be provided by LPC module (optional)
COM9 Auto Direction [Disable]
This item allows user to enable Auto-Flow control function of COM9 if sup-
ported.
Onboard Serial port 10 [C98/IRQ11]
This item allows user to adjust serial port 10 of address and IRQ.
This serial port 10 need to be provided by LPC module (optional)
COM10 Auto Direction [Disable]
This item allows user to enable Auto-Flow control function of COM10 if sup-
ported.
ARK-3202 User Manual 40