Allows users to determine the IRQ which the MODEM can use.
Suspend Mode
Allows users to determine the timing of system inactivity. All devices except the
CPU will be shut off.
Soft-Off by PWR-BTTN
Allows users to define the function of the power button.
–
Instant-Off
–
Delay 4 Sec Pressing power delays power off 4 seconds.
Power On by Ring
Allows users resume system by modem.
USB KB Wake-Up From S3
Allows users to wake the system up from power saving mode using a USB key-
board keystroke.
Resume by Alarm
Allows users to enable a date/time setting to power on the system
–
Disabled
–
Enabled
–
Day (of month) Alarm
–
Resume Time
PWRON After PWR-Fail
Allows users to select power fail function. The functions depend on chipset
design.
3.2.7
PnP/PCI Configurations
Note!
The "PnP/PCI Configurations" option sets up the IRQ and DMA (both
PnP and PCI) bus assignments.
Reset Configuration Data
Allows users to clear any PnP configuration data stored in the BIOS.
Resources Controlled By
–
IRQ Resources
Allows users to respectively assign an interrupt type for IRQ-3, 4, 5, 7, 9, 10,
11, 12, 14, and 15.
–
DMA Resources
Allows users to respectively assign an interrupt type for DMA, 0, 1, 3, 5, 6,
and 7.
3.2.8
PC Health Status
Note!
The "PC Health Status" option controls the thermal, fan and voltage sta-
tus of the board. It is chipset independent.
Shutdown Temperature
Enables users to set CPU temperature limits, ranging from 60° C to 75° C.
[Disabled]
[Instant-Off]
Pressing power button powers off instantly.
[Enabled]
[Enabled]
[Disabled]
Disable this function.
Enable alarm function to power on system
1-31
(HH:MM:SS); Alarm (0-23); (0-59); (0-59)
[Former-Sts]
[Disabled]
[Auto (ESCD)]
[Disabled]
29
ARK-1380 User Manual