3.9 PnP/PCI Configurations
3.9.1 PnP OS Installed
This features allows you to install the PnP OS. The commands are
"yes" or "no."
3.9.2 Reset Configuration Data
Note:
3.9.3 Resources controlled by:
The commands here are "Auto" or "manual." Choosing "manual"
requires you to choose resources from each following sub-menu.
"Auto" automatically configures all of the boot and Plug and Play
devices but you must be using Windows 95 or above.
48
PCA-6003 User's Manual
This is left "Disabled." Select "Enabled" to reset
Extended System Configuration Data (ECSD) if you
have installed a new add-on and your OS won't boot
and you need to reconfigure.
Figure 3-8: PnP/PCI configurations screen