Advantech ARK-3202 User Manual page 51

Power-Supply Type [ATX]
This item allows user to set power-supply type, ATX or AT mode.
ACPI Suspend Type [S3(STR)]
This item allows user to select sleep state when in suspend.
S1(POS) The suspend mode is equivalent to a software power down;
S3(STR) The system shuts down with the exception of a refresh current to
the system memory.
Run VGA BIOS if S3 Resume [Auto]
This item allows system to reinitialize VGA BIOS after system resume from
ACPI S3 mode.
Power Management [User Define]
This item allows user to select system power saving mode.
Min Saving Minimum power management. Suspend Mode=1 hr.
Max Saving Maximum power management. Suspend Mode=1 min.
User Define Allows user to set each mode individually. Suspend Mode= Dis-
abled or 1 min ~1 hr.
Video Off Method [DPMS]
This item allows user to determine the manner is which the monitor is blanked.
V/H SYNC+Blank This option will cause system to turn off vertical and horizontal syn-
chronization ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Initial display power management signaling.
Video Off In Suspend [Yes]
This item allows users to turn off video when system is in suspend mode.
Suspend Type [Stop Grant]
This item allows users to determine the suspend type.
Suspend Mode [Disabled]
This item allows users to set a delay time. If system inactivity exceeds the delay
time, all devices except the CPU will be shut off.
Soft-Off by PWR-BTTN [Instant-Off]
This item allows users to define function of power button.
Instant-Off Press power button for instant power off.
Delay 4 Sec Press power button for four seconds to initiate power off.
CPU THRM-Throttling
The ability is control how much percent of your CPU's clock speed will be throt-
tled down when the CPU overheat. You can set "75.0%", "50.0%", and "25.0%".
PowerOn by LAN [Enabled]
This item allows users to power on the system via LAN. The choices are
"Enabled" and "Disabled".
PowerOn by Modem [Enabled]
This item allows users to power on the system by Modem. The choices are
"Enabled" and "Disabled".
PowerOn by Alarm [Disabled]
The choices are "Enabled" and "Disabled". If enabled, the fields that follow indi-
cate dates and times of alarm settings.
43 ARK-3202 User Manual