Installing Memory Modules - Dell PowerEdge R920 Owner's Manual

Figure 18. Ejecting The Memory Module
1. memory module
3. memory-module socket
7. If a memory module or a memory-module blank is installed in the socket, remove it.
NOTE: Retain the removed memory-module blank(s) for future use.
Figure 19. Removing The Memory Module
1. memory module/memory-module blank
8. Install memory-module blanks in vacant memory-module socket(s) to ensure proper system cooling..
9. Close the memory riser cover.
10. Install the memory risers. See
11. Close the system.
12. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Installing Memory Modules

WARNING: The memory modules are hot to the touch for some time after the system has been powered down.
Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges
and avoid touching the components or metallic contacts on the memory module.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
52
Installing a Memory Riser.
2. memory-module socket ejectors (2)